Monday, June 3, 2013

Applying a Graded Approach to Training Projects – A Systematic ID Process


Theory Basis: Systems Theory and Tools

We live in a resource limited world.  How to determine the best allocation of resources has been a challenge for leaders and management since we evolved the ability to make choices.

The “graded approach” is a management tool used to determine where to assign appropriate resources using a risk-based approach.  In theory it seems pretty simple:  The greater the risk the greater the amount of resources allocated in order to achieve a level of interventions sufficient to mitigate the risk or reduce it to an acceptable level.

What does this have to do with instructional design?  There is a continuum as to the rigor we can perform our tasks within the design process you use; ADDIE for example. The level of rigor can vary in the amount of documentation, involvement of others, and levels and number of approvals.  The continuums expands from designing a course entirely by ourselves with not documentation, while on the other end of the continuum every step, every decision and every document is approved and maintained as an auditable, quality record with heavy stakeholder involvement ( Diagram of Possible Stakeholders ).

I have often read questions on social media sites and professional society discussion boards asking how to estimate the amount of time and effort to complete a training project.  My first thought is, that it depends. It depends on a lot of variables one being the level of rigor to be applied during the process you choose. WHY?  More rigor = More Resources à More Cost + More Time

By defining the level of rigor, you can make a better estimate of time and cost to complete a training project, better define your deliverables, and clarify expectations.  At the very least it can’t hurt to be prepared with a methodology to help answer the question.

 

What is Risk?

The graded approach is based on risk. The level of risk, the expose to the chance of injury or loss, can be quantified by weighing two factors: probability and consequences, or


Probability

Probability is a measure or estimation of how likely it is that something will happen or that a statement is true. The higher the degree of probability, the more likely the event is to happen. It helps me to think of probability in the context of two factors: history and prediction.  That is, has it happened in the past and at what frequency, and what is the chance a consequence may happen?

Consequences:

The array of things that might happen based on the turn of events is only limited by your imagination.  Leaving creativity aside, I have found it practical to categorize consequences into the following types:

·        Personal – Health & Safety Professional, Bureau of Labor Statics, OSHA (What are the physical realities that result in injury)

·        Equipment/Facility – Incident Reports & Lessons Learned

·        Political – Hot topic – News worthy, Weekly Safety Start, Company Weekly Message, Recent all employee briefing, Recent general delivery e-mail,

How Much Rigor is Enough

The goal is to determine an appropriate level of rigor to be applied during a training project based on a “graded approach” that will provide sufficient return on investment such that the training provided will enhance employee performance and impart an increase in event prevention.

You can decide the level of rigor for the overall process or break it down to a level reasonable for your situation; for example, each phase of the ADDIE process (analysis, design, development, implementation or evaluation).

The factor that has the greatest influence on time and resources is the level of involvement of the various stakeholders.  This is a kind of balancing act because you need sufficient involvement to cover all your bases but, in general, the more stakeholders involved the increase of time and logistical effort. 

 Methodology Overview:

This methodology has four steps:

·        Quantify the level of consequence. Determine a “consequence factor” based on the average of the numerical ratings assigned to the types of consequences.

·        Quantify the probability by selecting a numerical value from a chart.

·        Multiply the two values to determine  the “rigor value”

·        Locate the “rigor value” on the Rigor Level Chart to find suggest application guidance.



Please note: The instructional design tasks to be performed will vary based on the instructional design model you use and the rigor guidelines will change based on your specific work conditions.  You can use the tables as created and/or modify them to represent the steps (tasks) in your process. 

Methodology Details:

It is usually prudent to involve resources such as interpretive authorities (IAs) subject matter experts (SMEs) and safety professionals for guidance and information about the potential consequences.

1.    Determine the “Consequence” factor:

a)   Applying reasoned judgment and weighing information from reliable source(s), select a rating value from the Risk Determination Chart ( Full Chart) for each consequence category (Personal, Equipment/Facility and Political).

Questions for Consideration
Personal
Using the descriptions of injury consequences what is the worst case scenario for an immediate event?

·        No injury or health effects not affecting work performance or causing disability

·        Slight injury or health effects (self-treat) or first aid

·        Recordable Injury

·        Lost work day, restricted work days

Equipment/Facility
·        Is a production facility going to apply the training?

·        Is the training related to any safety systems or safety basis?

·        Is there a possibility of a release of hazardous substances (chemical/radiological)?

Political
·        Is there a possibility of information of an event being directly fed to personnel outside of the organization?

·        Has an “event” related to the topic within the last 30 days?

·        Have there been recent (last couple of weeks) company safety bulletins, all employee messages, mandated briefings related to the topic?

·        Would an event make the local news broadcasts?

·        Would an event make national news broadcasts?

·        Could any laws been broken (state/federal)?


b)   Record the values in the Consequence Table below.

c)    Total the category values and record the total. 

Category
Rating Value
Average
Personal
 
 
 
Equipment/Facility
 
 
 
Political
 
 
 
Total
 
 
Divide Total by 3
 
 
Consequence Factor
 

Consequence Table

d)   Divide the category total by 3 and record the answer. This is the “consequence factor”. 

2.    Transfer the Consequence Factor into the Rigor Value Table below. 

3.    Quantify the Probability Factor from the Risk Determination Chart ( Full Chart) by considering the current barriers to prevent an event and the previous history of events, if any.  Insert the value into the Rigor Value Table below.

Determining Probability - Considerations

Probability is affected by the quantity of past occurrences balanced with the change of future occurrences.

·        Seek out your Health & Safety professional and get advice

·        Look for statistics from the following sources:

o   OSHA Commonly used statistics - http://www.osha.gov/oshstats/commonstats.html

o   OSHA – Chemical Exposure Health Data - http://www.osha.gov/opengov/healthsamples.html

o   EEPA – Toxic Release Inventory Program - http://www.epa.gov/tri/tridata/index.html

·        Have there been recent changes to the facility, procedures, or processes to prevent occurrences?
 
4.    Determine the Graded Approach Rigor Value by multiplying the Consequence factor by the Probability factor.

Consequence Factor
 
Probability Factor
Rigor Value
 
 
Multiply
(*)
 
 

Rigor Value Table 

Using an appropriate Rigor Level Chart (Full Set of Charts) find the graded approach application guidelines based on your “rigor value” by locating the value in the top row.  The guidelines for that value of risk are located in the column below.



When making decisions that will impact the overall time and cost of a training project, I suggest getting management or client concurrence to implement the application guidelines.

Summary and Closing

Whether or not you choose to use a systematic approach to determine the level of rigor to be applied in your design is in itself the application of a graded approach.  Will it be worth the time and effort to implement a process?  That is for you and your management to determine.

It can be a good tool if you are bidding on a contract or negotiating the processes and end products of your efforts.

Outside the world of academia, when having to answer to outside regulators and audits it can be a lifesaver when having to justify your process.

In the limited-resource world we live in it can also be a vehicle to obtain the sufficient budget to support training excellence.

Best regards,

Cj

 Acknowledgement:
I would like to thank Dr. Rick Zimmerman, a safety professional who I work with, for his guidance in developing the Risk Determination Chart.

 

2 comments:

  1. Great blog post, Thanks for sharing Toxic Release Inventory information. That is very useful to Environmental Management.

    ReplyDelete
  2. IDMI is providing workshops on Digital Marketing, SEO and Social Media especially at Engineering and Management Colleges of Hyderabad, Telangana, Andhra Pradesh, India.
    email marketing conferences

    ReplyDelete